Due to the more compact structure of the wedge brake, the force of the brake cylinder is directly transmitted to the brake pads. The braking efficiency is higher and the weight of the whole system is lighter. According to the data of markets, a 6×4 tractor with all front and rear wheels replaced by wedge brakes can reduce weight by 55 kg.
In addition, with the improvement of highway traffic conditions and the continuous improvement of vehicle performance, wedge brake cylinder, as a new product that can improve the active safety of vehicles, and it will be rapidly promoted and applied.
Product Description: This product is suitable for many models in the market at present, and it is very popular around markets.
Advantages of brake cylinders
1. Light weight: Compared with the traditional air brake drum brake, the wedge assembly in the wedge brake system that replaces the self-adjusting arm, s camshaft and air chamber bracket in the traditional brake system and the wedge brake bottom plate is relatively lighter than the traditional brake plate. According to the statistics, a brake cylinder can reduce the weight by 10-15kg.
2. Quick braking response and large braking torque: wedge brake has simpler structure than usual camshaft brake. The transmission efficiency of wedge brake cylinder is greater than camshaft brake cylinder, and the thrust loss is small in the process of pushing. Therefore when braking, the wedge brake has a fast response and a large braking torque.
3. It can reduce fuel consumption and transportation costs
OE No.: 1-47601-078-2/1-47601-077-2
JAF No.: JAF0784-L#/JAF0785-R#
Net weight: 7.2kg Gross weight: 7.53kg,
Packing method: one inner box for each product, 6 inner boxes for one box
Neutral packaging: each product with one plastic bag, inner box and outer carton
Outer box size: 73CM * 28cm * 22cm, inner box size: 25.5cm * 23.5cm * 9.2cm
1. Split ring (for shaft) 2. Butterfly gasket 3. Tower spring 4. Push rod 5. Small dust cover 6. Spring seat 7. Retaining ring (for hole) 8, Bracket 9. Roller 10. Card 11. Spring 12. Adjusting Bolt 13. Retaining ring 14.Torsion spring 15.Dust cover 16. Butterfly spring 17. Piston sleeve 18.Piston 19. Slider 20.Shell 21. Bolt
1 – shoe shaft 2 – return spring 3 – Wedge expander 4 – shoe assembly 5 – brake backing plate 6 – dust cover 7 – brake air chamber
Instructions:The maintenance mileage of wedge brake is recommended to be 100000 km. The main inspection is to check the lubricating oil in the brake deteriorates and its seals. If it is found to be deteriorated, it is necessary to clean all parts and relubricate them for maintenance (Note: the dust cover is strictly forbidden to contact cleaning solvent, such as diesel, kerosene, gasoline, etc.), adjust and make the interior filled with grease. If the dust cover is damaged, the dust cover needs to be replaced. The general lithium base grease (cb5671) is used as the lubricating grease. If any parts are damaged, they must be replaced.